ML104QTV230S – Install Guide

IMPORTANT: WARRANTYBefore using any MONITECH product, please carefully review this Manual as well as any additional documentation provided with your shipment.

Attempting any of the following will void product warranty:

• Unauthorized repairs or parts replacement
• Inappropriate use or placement: exposing the product to liquids, harmful gases, electrical shock, physical shock, temperatures beyond the range of -4°F to 140°F (-20°C to 60°C)
• Use of electrical voltage other than 12V 4.16A (power supply and AC cable provided)
• Removal or modification of serial, product, or warranty labels.

REMOVAL

• Step #1) Turn off main power, turn off machine.
• Step #2) Unscrew the screws around the border of the HMI, unplug the video cable and detach power.
• Step #3) Remove the CRT frame with all the electronics from HMI by unscrewing the screws holding it in place. Keep these screws for re-installation.
• Step #4) Remove high voltage from the CRT by placing a screwdriver underneath the rubber of the anode lead and the other end touching metal. With another screwdriver, put the tip onto metal and cross it with the first screwdriver. Remove the Anode Lead out of the tube.
• Step #5) Unplug the Neck Board, Yoke, Contrast & Brightness Connector. Remove the Degauss around the CRT frame & Remove the Driver Board.
• Step #6) Unscrew the 4 screws holding the CRT monitor on the frame. Take the CRT out of the frame. Keep the 4 screws just removed for installing your Monitech Monitor. Now you are left with the CRT frame.

INSTALLATION

• Step #1) Take the Monitech monitor out of the box and unscrew the 4 screws on the side of the monitor. Place the black bezel we sent with the monitor to center the screen & mount it by using the screws you just took off.
• Step #2) Now mount your Monitech monitor onto the old CRT frame, using the screws removed in Step #6.
• Step #3) Place the frame with your Monitech monitor back into your machine.
• Step #4) Open up the MK box and get MAP302 & MAP307. Plug MAP302 into a wall outlet and plug the other side into MAP307. Plug the jack into our monitor.
• Step #5) Plug in the Video Cable that you unplugged in Step #2. If you need an extension, use MAV003.
• Step #6) Turn on main power & turn on machine power. Please refer to our user guide to adjust screen settings. After the screen is adjusted, mount the front cover of your HMI back onto your machine.