The Fagor 8025 CNC is a control system (not a machine itself) that was very popular in the 1990s and early 2000s. Many shops around the world still use it today. Think of it as the “brain” of the machine—it tells the machine what to do.
One of the most common problems with older Fagor 8025 units is the CRT screen wearing out. The good news is you don’t need to replace the whole CNC system. You can simply use an LCD monitor replacement to give your control a clear, modern display and keep your machine running.
Variants of the Fagor 8025 CNC
The Fagor 8025 came in different versions, each made for different types of machines. Here are the main groups:
-
Fagor 8025 GP (General Purpose)
-
Used for many machine types like grinders and lasers.
-
Came with an 8-inch monochrome screen and full keyboard.
-
-
Fagor 8025 M / MG / MS (Milling Machines)
-
8025 M / MG: Supports up to 4 axes.
-
8025 MS: Supports up to 5 axes with extra features like 2D/3D simulation, probing, and canned cycles.
-
-
Fagor 8025 T / TG / TS (Lathes)
-
8025 T / TG: Standard 4-axis control for lathes.
-
8025 TS: Adds a C-axis for advanced turning and tool compensation.
-
In short, the Fagor 8025 series has three big families:
- GP (General Purpose)
- M / MG / MS (Milling / Machining)
- T / TG / TS (Turning / Lathe)
Machines That Used the Fagor 8025
The Fagor 8025 was installed in many machines, such as:
- Milling machines – common with 8025M and 8025MG models.
- Lathes – run by the 8025T and 8025TG.
- CNC routers – popular because of its multi-axis control.
- Grinders – used for precise grinding work.
Machine Builders That Used Fagor 8025:
- Lagun – MC 9040 machining center.
- Hardinge – DV-59 CNC Accuslide lathe.
- Motionmaster – Large-format CNC routers.
- DMS (Diversified Machine Systems) – CNC routers.
- Freedom Machine Tool – CNC routers.
- Quintax – 5-axis routers.
- Ganesh – Lathes and machining centers.
- Standard CNC – Milling machines and routers in the 1990s–2000s.
Why Upgrade to an LCD Monitor Replacement?
Most original Fagor 8025 units came with CRT screens, which have problems like:
- Dim or fading display
- Burn-in marks
- Higher power use
- Hard-to-find parts
By upgrading to an LCD monitor replacement for your Fagor 8025 HMI:
- The screen is clearer and brighter.
- It uses less energy.
- Installation is easy with direct-fit kits.
- Your CNC machine gets a longer life without a full system change.
The Fagor 8025 CNC HMI is still trusted in many shops because it’s reliable and simple to use. If your screen is failing, you don’t need to spend big money on a brand-new control. An LCD monitor replacement is a smart, cost-saving way to keep your CNC machine working smoothly.
By upgrading the display, you extend the life of your control system and make the operator’s job easier. It’s a small change that makes a big difference.
Contact us and let us show you how we can help you solve your business challenges. Our team not only offers replacement parts but also provides industrial display repair services. And don’t forget to stay tuned to our pages on Facebook, Twitter, LinkedIn, and YouTube for the latest news.
