If you own an Allen-Bradley Panelview Plus Series 7 terminal with a touchscreen that is no longer functioning properly, you may be considering replacing it. One option for replacement is the MF900PPT7 touchscreen and overlay from t2industrial.com. In this blog, we will go over the process of replacing the touchscreen and overlay on an Allen-Bradley Panelview Plus Series 7 terminal with the MF900PPT7 from t2industrial.com.
Step 1: Shut down the terminal and unplug it from the power source.
Before you begin the replacement process, it is important to shut down the terminal and unplug it from the power source to ensure your safety and prevent any damage to the terminal.
Step 2: Remove the old touchscreen and overlay.
To remove the old touchscreen and overlay, you will need to carefully pry off the bezel using a flat-head screwdriver or a similar tool. Once the bezel is removed, you should be able to see the screws that hold the touchscreen and overlay in place. Carefully remove these screws and lift the touchscreen and overlay off of the terminal.
Step 3: Install the new touchscreen and overlay.
To install the new touchscreen and overlay, place it onto the terminal and secure it in place using the screws you removed in the previous step. Make sure the touchscreen and overlay are properly aligned and seated on the terminal before tightening the screws.
Step 4: Reassemble the terminal.
Once the new touchscreen and overlay are installed, you can reassemble the terminal by replacing the bezel and any other components you removed during the disassembly process.
Step 5: Test the new touchscreen and overlay.
After reassembling the terminal, plug it back in and power it on. Test the new touchscreen and overlay to make sure it is functioning properly. If everything is working as expected, you have successfully replaced the touchscreen and overlay on your Allen-Bradley Panelview Plus Series 7 terminal with the MF900PPT7 from t2industrial.com.
Conclusion:
Replacing the touchscreen and overlay on an Allen-Bradley Panelview Plus Series 7 terminal with the MF900PPT7 from t2industrial.com is a relatively straightforward process that can be completed with minimal tools and a bit of technical know-how. If you are comfortable following the steps outlined above, you should be able to successfully replace the touchscreen and overlay on your terminal. However, if you are not comfortable performing this type of repair, it is recommended that you seek the assistance of a qualified technician.
If you are looking for a top-quality replacement touchscreen and overlay of an Allen-Bradley Panelview Plus Series 7 Part # 2711P-T9W22D9P, the MF900PPT7 Touchscreen and Overlay from t2industrial.com is the best choice.
For more information about the MF900PPT7 Touchscreen and Overlay, please do not hesitate to contact us.
Do you have problems with old machines that you can’t find a solution to? Contact our experts! And don’t forget to stay tuned to Facebook, Twitter, LinkedIn, and YouTube for the latest news.
If you need guidance or any help on how or what to replace your HMI, our team of experts is available just give us a call, or send us an email.
We have multiple replacement parts for units like Allen-Bradley, Siemens, Anilam, Dynapro, Fanuc, and a lot more. You can check our product catalog here.