Panelview Plus 700 Touch Screen only (no overlay membrane)

This kit includes the 5-wire resistive glass digitizer only. It is designed for repairs where the internal glass is cracked or unresponsive, but the external decorative brand membrane (the plastic overlay with the “Allen Bradley” logo) is still in good condition and can be reused.

If your HMI has physical cracks or the touch response is “dead” in certain areas regardless of pressure, you need this glass touch screen. If the buttons are simply worn, torn, or cosmetically damaged but the touch still works, you likely only need the membrane overlay.

Yes. This 7-inch glass digitizer is compatible with the PanelView Plus 700 and PanelView Plus 6 700 series. It fits catalog numbers beginning with 2711P-T7, whether they are powered by AC or DC.

No. The touch screen features a flexible ribbon cable (tail) that inserts directly into the ZIF (Zero Insertion Force) connector on the PanelView logic board. No soldering is required, making it a straightforward field-replaceable unit.

This unit uses high-durability resistive touch technology. This is the industrial standard because it allows operators to interact with the HMI while wearing heavy work gloves and is resistant to common factory contaminants like oils, dust, and light moisture.

Replacing the internal glass digitizer is a fraction of the cost of a new or refurbished HMI. It allows you to maintain your existing application software, communication settings, and firmware without the need for backups or reconfiguration.

Most industrial touch screens for the 2711P series include a perimeter adhesive gasket to create a seal against the bezel. This ensures the unit remains NEMA-rated for dust and moisture protection once the repair is completed.